DIY-Friendly • 0–99.9°C Control • AC 110–220V • 100W Max
Built for Homemade Egg Incubators
A practical parts kit for DIY builders who want to create a custom incubator box or warming chamber without buying a full machine.
Precise 0–99.9°C Temperature Control
Set your target temperature and fine-tune in small increments using SET / + / – for stable, repeatable incubation conditions across different projects.
Accurate Probe-Based Monitoring
Includes an NTC 3435 10K probe (1%) with ±0.1°C measurement accuracy, so the controller responds to real cabinet temperature rather than guesswork.
Complete DIY Hardware Bundle
Comes with the digital controller, heating wire, winding columns, screws, and a user manual—everything needed to assemble the heating/control section of your build.
Wide Voltage Compatibility + Safe, Simple Integration
Works with AC 110–220V input and supports up to 100W output, making it easy to integrate into most homemade incubator setups (match the heating load to the rated output power).
Build Your Own Incubator Core Kit ����
If you’re making a homemade egg incubator, the hardest part is keeping heat steady and easy to adjust. This kit gives you the control core—so you can focus on building the box, airflow, and layout that fits your setup.
Why DIY Builders Choose It
Stable, adjustable heat: Set your target temperature and fine-tune anytime with SET / + / –.
Real-time sensing: The included probe measures the incubator temperature directly for more dependable control.
Made for custom builds: Works with AC 110–220V and supports heating loads up to 100W, making it easy to integrate into most DIY designs.
Quick Specs (Only What Matters)
Control range: 0–99.9°C
Max output: 100W
Probe: NTC 3435 10K (1%), ~1 m cable
Measurement accuracy: ±0.1°C
Data protection: Yes
In the Box
Digital controller + temperature probe + heating wire + winding columns + screws/hardware + manual
You Provide (Not Included)
Fan, pad, water tray/humidifier, and egg tray shown in images are for demonstration only.
Note: If the screen shows “LLL”, it indicates a temperature sensor fault.
No comments yet~
Bright, cool LED light helps you check fertility and monitor embryo development during incubation
A simple, low-stress way to hatch chicken, quail, and bird eggs at home.
Precise Thermostat & High Hatch Rate Backyard & School Use Energy-Saving 8-18 Egg Hatcher
SGS-Certified Waterproof Body with Cool Light Technology – Safe for All Egg Types
Fast Heat-Up • Self-Regulating Warmth • Built for DIY Enclosures